Energy efficient control of ice and snow melting
- Type ETO2

An intelligent all-in-one solution for ice and snow melting usable for all applications within hydronic as well as electrical heating.
Optimal operation is ensured due to output control which makes the system both effective and economical.
ETO2 offers you the possibility of snow melting - the green way.

Electronic on/off control up to 11 KW
2 zone control, individually controlled at the same time
Economical control - minimising energy consumption
Adjustable moisture sensitivity
Detection of temperature and moisture
Display and "knob wheel" for easy programming
Control of electrical or waterbased ice and snow melting systems
Language options

Green Comfort - Save 66% CO2
Thermostat functions ensuring minimal energy comsumption

Read all about our Cleantech Vision & politics here.

Using readings from temperature and moisture sensors, the controller ensures economical control of power consumptions
when keeping outdoor areas and roofs free of ice and snow. The moisture sensor is installed in the surface of the outdoor
area or placed in the gutter. As soon as moisture is detected, the ETO2 controller activates the snow melting system.
Once the sensor has dried out, the thermostat immediately goes in afterrun and the system will continue to provide heat
for a chosen time.

For Gutters - ETO2-4550, ETOR-55 and ETF-744/99:
The sensor type ETOR is designed for mounting in gutters and down pipes etc. ETOR detects moisture, while ETF detects temperature.

For Outdoor areas - ETO2-4550 and ETOG-55 is used:
The sensor type ETOG is designed for embedding into the surface of the outdoor area. ETOG detects ground temperature
and moisture. The air sensor type ETF-744/99 can be used for measuring rapidly temperature decreases.

Remote control:
It is possible to control the ETO2 from an external signal (day/week timer, GSM-module or other signal source) The ETO2 can be switched on/off (standby) and the heating
system can be forced on, in the after run time that has been set in the menu.

Product Programme

TYPE	PRODUCT
ETO2-4550	Thermostat incl. cover for surface wall mounting
ETOG-55	Ground sensor for detection of temperature and moisture 10m cable
ETOG-56	Ground sensor for detection of temperature and moisture 25m cable, to be used with ETOK-1
ETOK-1	Mounting kit for ETOG-56
ETOR-55	Gutter sensor for detection of moisture 10m cable
ETF-744/99	Outdoor sensor for detection of temperature
ETO2-BOX	UL-mounting box for ETO2
ETTB	Spacer plate for ETO2-4550